DUO combination valve universal (left or right figure possible) with a connection spacing of 50 mm for central heating systems. It has a pre-setting to limit the flow.
Connect the valve to the central heating system using 3/4″ x 16 mm fittings, and to the radiator using 3/4″ x 1/2″ nipples. Nipples and fittings for PEX pipes ∅16 mm are included. The thermostatic insert should be on the supply side of the central heating system. If this is not the case, remove the thermostatic insert from the body and swap the thermostatic insert with the return valve on the opposite side. Set the thermostatic head knob to the maximum position (5) and mount it on the thermostatic insert M30x1,5 mm. To ensure proper operation of the valve, installation should be performed by a qualified installer. Adjust the room temperature by setting the knob to: T (7°C), 1 (12°C), 2 (16°C), 3 (20°C), 4 (24°C), 5 (28°C). The presented temperatures are estimated.
EAN CODE: 5905359252887 PRODUCT CODE: V22217
Connection type: | for radiator 1/2”, for central heating installation M22×1,5 mm |
Head thread: | M30x1,5 mm |
Operating temperature: | max 100℃ |
Maximum work pressure: | 10 bar |
Head temperature range: | 7℃ to 28℃ |
Head location: | on the supply side |
The set includes: | PEX installation fittings 16 mm |